Search results for 'shanks and flanges'

WNG Natural Vertical Hammers, Gross 4
N/A

Part Number: 06-5446

Shanks, Vertical Set of 90
Vertical Hammer Shanks

Part Number: 06-5683

Tool, Standard Gram weight set
Gram weight set

Part Number: 06-5782

Capstan, Dowel for Vertical Pianos, Set of 90
Dowel Capstan *- Composite head and steel wire (overall length 4").

Part Number: 06-0508

Yamaha U1 Whippen, Set of 90
Whippen set.

Part Number: 06-5716

WNG Pounder
WNG Piano Pounder allows rebuilders to achieve a stable regulation for pianos

Part Number: 06-5515

YC/Yamaha Vertical Hammer Butts - Composite - set of 90
YC/Yamaha Vertical hammer butts

Part Number: 06-5429

Vertical Piano Action, Complete package
Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

Part Number: 06-5804

Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached
Features low leverage, a large knuckle, and a Baldwin T2 flange. Without knuckles attached. Set of 90.

Part Number: 06-5430-11

Baldwin T2 Short Shank & Flange Set, Flex 1
Features low leverage, a large knuckle, and a Baldwin T2 flange. Set of 90.

Part Number: 06-5430-10

Drill Bit - Hammer Boring, Flex 3
One drill bit. 3.6 mm for flex 3 shank tubes.

Part Number: 06-5662

Drill Bit - Hammer Boring, Flex 2
One drill bit. 4.15 mm for flex 2 shank tubes.

Part Number: 06-5661

Action Support Assembly, Vertical, Small
Action Support assembly, Vertical, Small

Part Number: 06-5991

Shank Deflection Gauge
Tool for accurately measuring shank deflection (or strength) in thousandths of an inch.

Part Number: 06-5862

Steinway V Whippen , Set of 90
Steinway V Whippen set.

Part Number: 06-5689

Steinway Repetition Set (no cushion, heels not attached)
Replaces Steinway repetitions. No rest cushion, Heels are not attached. Set of 90.

Part Number: 06-5299

Tool set, Vertical Action Installation
Set of Vertical action installation tools.

Part Number: 06-5990

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Knuckles included but not attached. Set of 90.

Part Number: 06-5291-21

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Set of 90.

Part Number: 06-5291-20

Kawai T1 Shank & Flange Set, Flex 2
Features a large knuckle and a Kawai T1 flange. Flex2. Set of 90.

Part Number: 06-5289-20

Knabe T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Knabe T1 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5111-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Renner flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5110-21

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Young Chang / Yamaha Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Yamaha flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5107-21

Custom Shank & Flange Set, Flex2 (knuckles not attached)
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Knuckles not attached. Set of 90.

Part Number: 06-5106-21

Custom Shank & Flange Set, Flex2
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Set of 90.

Part Number: 06-5106-20

Steinway Type 4 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5103-21

Steinway Type 3 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Hamburg flange. Kuckles are included but not attached. Set of 90.

Part Number: 06-5102-21

Steinway Type 2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features medium leverage, a large knuckle, and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5101-21

Steinway Type 1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features high leverage, a medium knuckle, and a New York flange. Knuckle are included but not attached. Set of 90.

Part Number: 06-5100-21

Young Chang / Yamaha Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Yamaha flange. Set of 90.

Part Number: 06-5107-20

WNG Standard Shank, ea., Flex 2
Features low leverage, a large knuckle, and a WNG flange. Set of 90.

Part Number: 06-0571

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2 (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Set of 90. Knuckles not attached

Part Number: 06-5109-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2
For pre-Aeolian Mason & Hamlin and other pianos. Features low leverage, a large knuckle and a WNG flange. Set of 90.

Part Number: 06-5109-20

Steinway Type 5 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-21

Steinway Type 5 Shank & Flange Set, Flex 2
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-20

Steinway Type 4 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5103-20

Steinway Type 3 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Hamburg flange. Set of 90.

Part Number: 06-5102-20

Steinway Type 2 Shank & Flange Set, Flex 2
Features medium leverage, a large knuckle, and a New York flange. Set of 90.

Part Number: 06-5101-20

Steinway Type 1 Shank & Flange Set, Flex 2
Features high leverage, a medium knuckle, and a New York flange. Set of 90.

Part Number: 06-5100-20

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Knabe T1 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Knabe T1 flange. Set of 90.

Part Number: 06-5111-20

Kawai T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a Kawai T1 flange. Knuckles not attached. Set of 90.

Part Number: 06-5289-21

Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Baldwin flange. Flex2, Knuckles included but not attached. Set of 90.

Part Number: 06-5105-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Renner flange. Set of 90.

Part Number: 06-5110-20

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5104-21

Aeolian Mason & Hamlin Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.

Part Number: 06-5104-20

WNG Select Vertical Hammers, Gross 4
N/A

Part Number: 06-5445

Steinway K Whippen , Small heel, Set of 90
Steinway K Whippen set. Small heel.

Part Number: 06-5688

Steinway K Whippen , Large heel, Set of 90
Steinway K whippen set. Large heel.

Part Number: 06-5687

Steinway Vertical Damper Lever, Set of 75
Steinway Vertical Damper Lever. Set of 75

Part Number: 06-5686

Steinway Vertical Hammer Flange, Set of 90
Steinway Vertical Hammer flange. Set of 90

Part Number: 06-5685

Steinway Vertical Hammer Butt assembly, Set of 90
Steinway Vertical Hammer Butts. Set of 90

Part Number: 06-5684

WNG Classic T2 Repetition Set (no cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm, no cushions,Heels are not attached. Set of 90.

Part Number: 06-5743

WNG Classic T2 Repetition Set (no cushion, heels attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. no cushions, 24 mm Heels are attached. Set of 90.

Part Number: 06-5742

Steinway Repetition Set (tall rest cushion, heels not attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are included, but not attached. Set of 90.

Part Number: 06-5754

Steinway Repetition Set (tall rest cushion, heels attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are attached. Set of 90.

Part Number: 06-5753

Mason & Hamlin Standard Shank for tubular rail, ea.,
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

WNG Classic T1 Repetition Set (heels attached)
Replaces Wessell, Nickel & Gross T1 repetitions that use the Classic WNG Jack. Heels are attached. Set of 90.

Part Number: 06-5027

Damper Action Tapping Kit
Kit contains: Aluminium Tapping Fluid, 3.3mm Drill, and M4.7mm Thread Tap.

Part Number: 06-5919

WNG Classic T2 Repetition Set (w/cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm with cushions,Heels are not attached. Set of 90.

Part Number: 06-5757

Tapping Fluid, aluminum, 4 oz.
Tapping Fluid, aluminum, 4 oz.

Part Number: 06-0282

Aeolian T2 Repetition Set (no cushion, heels not attached)
Aeolian T2. no cushion, Heels not attached. Set of 90.

Part Number: 06-5752

Baldwin Clemson Repetition Set T2 (heels attached)
Replaces Baldwin Clemson T2 style repetitions. Heels are attached. Set of 90.

Part Number: 06-5033

Baldwin Short Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Baldwin flange . Set of 90. More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5105-20

Assembled Vertical Piano Action
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5805

WNG Natural Hammers, Gross 6
N/A

Part Number: 06-5449

Backcheck Line & Height Jig
Backcheck Line & Height Jig

Part Number: 06-5682

Grand Hammer shanks - Carbon fiber - Flex 1 set of 90
Grand hammer shanks Flex 1

Part Number: 06-5635

11mm Composite Knuckles, Set of 90
11mm Composite Knuckles, set of 90

Part Number: 06-5473

Grand Action Model
Grand Action Model

Part Number: 06-2500

Double Panel 7-Ply Pinblock (1.500"/38.1mm)
Seven ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Part Number: 06-5481

Single Panel 7-Ply Pinblock (1.500"/38.1mm)
Seven ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5480

Steinway Type 5 Shank & Flange Set, (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-11

Steinway Type 5 Shank & Flange Set, Flex 1
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-10

Single Panel 5-Ply Pinblock (1.500"/38.1mm)
Five ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5478

Double Panel 5-Ply Pinblock (1.500"/38.1mm)
Five ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Part Number: 06-5479

Aeolian / Chickering Repetition Set (no cushion, no heels)
Replaces Aeolian / Chickering repetitions. No cushion, no heels. Set of 90.

Part Number: 06-5745

Aeolian / Chickering Repetition Set (no cushion, heels included)
Replaces Aeolian / Chickering repetitions. No cushion, heels included. Set of 90.

Part Number: 06-5744

Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Set of 90.

Part Number: 06-5291-10

Gram Gauge Jig
Use with gram gauge for accurate determination of gram tension in WNG flanges. Includes 10g gram guage.

Part Number: 06-5901

WNG Grand Shank/Butt assembly, W- knuckle, Set of 90
Grand Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size and knuckle position.

Part Number: 06-5298

WNG Shank/Butt assembly, W/O knuckle, Set of 90
Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size.

Part Number: 06-5297

WNG Shank Flange
Shank flange, WNG

Part Number: 06-0099

Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features a medium knuckle, and a Mason & Hamlin flange. Set of 90. Kuckles not attached More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5108-11

Wessell, Nickel & Gross Classic Shank & Flange Set, (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Knuckles not attached. Set of 90.

Part Number: 06-5109-11