Other Parts
Adjustable Plate Perimeter Bolt (38mm/1.500")
The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.
Part Number: 06-5300
Adjustable Plate Perimeter Bolt (46mm/1.811")
The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.
Part Number: 06-5301
Adjustable Plate Perimeter Bolt (54mm/2.128")
The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.
Part Number: 06-5302
Bridge Pin Set (#10)
Set of 100 3.1mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0237
Bridge Pin Set (#6)
Set of 100 2.0mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0233
Bridge Pin Set (#7)
Set of 100 2.2mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0234
Bridge Pin Set (#8)
Set of 100 2.5mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0235
Bridge Pin Set (#9)
Set of 100 2.8mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0236
Double Panel 5-Ply Pinblock (1.25"/31.8mm)
Pinblocks made in Mason & Hamlin Haverhill, Ma factory from quarter-sawn maple are prized by tuners for their "pin feel". Made with five plies of carefully dried and quarter-sawn New England hard rock maple, this pinblock is a good choice. Water resistant glue and quarter-sawn maple makes this block truly durable.
Part Number: 06-5467
Double Panel 5-Ply Pinblock (1.375"/34.9mm)
Five ply double panel value pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).
Part Number: 06-5468
Double Panel 5-Ply Pinblock (1.500"/38.1mm)
Five ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).
Part Number: 06-5479
Double Panel 5-Ply Pinblock (1.625"/41.3mm)
Five ply double panel value pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).
Part Number: 06-5469
Double Panel 7-Ply Pinblock (1.375"/34.9mm)
Seven ply double panel ultimate pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).
Part Number: 06-5476
Double Panel 7-Ply Pinblock (1.500"/38.1mm)
Seven ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).
Part Number: 06-5481
Double Panel 7-Ply Pinblock (1.625"/41.3mm)
Seven ply double panel ultimate pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).
Part Number: 06-5477
Flange Screw - M4 x 15 mm - set of 90
Flange Screw - M4 x 15 mm - set of 90 for WNG aluminum action rails
Part Number: 06-0346
Large Concert Casters Set
For use on pianos 8' (244cm) and larger, with legs cut to the proper length for the added height of the caster. Set of three includes two casters with a brake and one caster without a brake.
*Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*
Part Number: 06-5281
Rest Cushion Bracket W Tall Felt - Set/90
Rest Cushion Bracket W Tall Felt - Set/90
Part Number: 06-5755
Single Panel 5-Ply Pinblock (1.25"/31.8mm)
Five ply single panel value pinblock. 1 1/4" x 59" x 11 1/2"-5.6" (31.8mm x 1498.6mm x 292.1mm-142.2mm).
Part Number: 06-5464
Single Panel 5-Ply Pinblock (1.375"/34.9mm)
Five ply single panel value pinblock. 1 3/8" x 59" x 11 1/2"-5.6" (34.9mm x 1498.6mm x 292.1mm-142.2mm).
Part Number: 06-5465
Single Panel 5-Ply Pinblock (1.500"/38.1mm)
Five ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).
Part Number: 06-5478
Single Panel 5-Ply Pinblock (1.625"/41.3mm)
Five ply single panel value pinblock. 1 5/8" x 59" x 11 1/2"-5.6" (41.3mm x 1498.6mm x 292.1mm-142.2mm).
Part Number: 06-5466
Single Panel 7-Ply Pinblock (1.375"/34.9mm)
Seven ply single panel ultimate pinblock. 1 3/8" x 59" x 11 1/2" - 5 1/2" (34.9mm x 1498.6mm x 292.1mm - 139.7mm).
Part Number: 06-5474
Single Panel 7-Ply Pinblock (1.500"/38.1mm)
Seven ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).
Part Number: 06-5480
Single Panel 7-Ply Pinblock (1.625"/41.3mm)
Seven ply single panel ultimate pinblock. 1 5/8" x 59" x 11 1/2" - 5 1/2" (41.3mm x 1498.6mm x 292.1mm - 139.7mm).
Part Number: 06-5475
Small Concert Caster Set
Our best general purpose caster for all grand pianos. Set of three includes two casters with a brake and one caster without a brake.
*Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*
Part Number: 06-5280
Standard Caster Set
For use on pianos up to 7" or 213cm. Set of three.
*Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*
Part Number: 06-5279
Tuning Pin, #2-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 2-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5174
Tuning Pin, #2-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 2-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5175
Tuning Pin, #3-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 3-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5178
Tuning Pin, #3-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 3-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5179
Tuning Pin, #4-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 4-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5176
Tuning Pin, #4-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 4-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5177
WNG Sample Parts Kit
WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.
Part Number: 06-5231