Search results for 'order'

WNG Piano Pounder allows rebuilders to achieve a stable regulation for pianos

Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools

---

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

---

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Unassembled Top Action you can either use the online ordering form below or use the PDF Unassembled Hammer Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Assembled Top Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Drop Screwdriver

Unlike most drop screwdrivers, WNG's are intentionally made to be very short. This allows the technician to easily steady his hand on the shank flanges while regulating. WNG also offers two different versions of its Drop Screwdriver--one with a barrel and one without. The barrel helps to locate the tool on the drop screw, however, some technicians prefer not to have this barrel.

Balancier and Jack Regulating Tool

The handle and tool tip are the same on WNG's Jack and Balancier Regulating Tools--the only difference between the two are their lengths. The Jack Regulating Tool is the ideal length to reach in to the regulating screw on the jack.

Let-Off

The WNG Let-Off Tool allows you to adjust let-off button eye screws during a bench regulation. The tool's length is ideal for steadying your hand on the shank flanges and its tip is relieved so that it will not bind on the regulating screw. *Please note that the WNG Let-Off Tool is designed for setting let-off on actions that use an eye screw. It is not the appropriate tool for dowel regulating buttons.*

Damper Hook

Typically, piano technicians remove the damper to make the topbend--a process that is highly inefficient. When pianos are being manufactured, factory damper installer workers make this same bend while the damper is inside the piano, resulting is much less wasted time. WNG's Damper Hook enables piano technicians everywhere to use the factory's efficient method of making topbend while the damper is still inside the piano.

Dimension Gauges

WNG provides both metric and English gauges with the most common regulating dimensions used in bench regulations.

Backcheck Bender

The WNG Backcheck Bender was designed to be a comfortable yet functional tool with a slot to grip backcheck wire firmly and a tip with the ideal angle for bending backcheck wires. *Please note that this item is back ordered, call (573) 754-6690 for estimated ship date*

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

**In Stock but not available for online order. Please call Nina for pricing and availability at 916-719-4323**

One I-Beam Key Level Stick

For use on pianos 8' (244cm) and larger, with legs cut to the proper length for the added height of the caster. Set of three includes two casters with a brake and one caster without a brake. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*

Our best general purpose caster for all grand pianos. Set of three includes two casters with a brake and one caster without a brake. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*

For use on pianos up to 7" or 213cm. Set of three. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*