Search results for 'low angle jack'
Steinway Shank & Flange, ea., Flex 1
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-0311
WNG Pounder
Part Number: 06-5515
Vertical Piano Action, Complete package
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB
Part Number: 06-5804
Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached
Part Number: 06-5430-11
Baldwin T2 Short Shank & Flange Set, Flex 1
Part Number: 06-5430-10
Capstan V1 Aluminum, Hard anodized, Set of 90
Part Number: 06-5330
Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5291-21
Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)
Part Number: 06-5291-20
Knabe T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5111-21
Renner Type / Baldwin Long Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5110-21
Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
Part Number: 06-5108-21
Young Chang / Yamaha Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5107-21
Steinway Type 4 Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5103-21
Steinway Type 3 Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5102-21
Young Chang / Yamaha Shank & Flange Set, Flex 2
Part Number: 06-5107-20
WNG Standard Shank, ea., Flex 2
Part Number: 06-0571
Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2
Part Number: 06-5109-20
Steinway Type 4 Shank & Flange Set, Flex 2
Part Number: 06-5103-20
Steinway Type 3 Shank & Flange Set, Flex 2
Part Number: 06-5102-20
Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Part Number: 06-0570
Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
Part Number: 06-5108-20
Knabe T1 Shank & Flange Set, Flex 2
Part Number: 06-5111-20
Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5105-21
Renner Type / Baldwin Long Shank & Flange Set, Flex 2
Part Number: 06-5110-20
Aeolian T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Part Number: 06-5104-21
Aeolian Mason & Hamlin Shank & Flange Set, Flex 2
Part Number: 06-5104-20
WNG Classic T2 Repetition Set (no cushion, heels not attached)
Part Number: 06-5743
WNG Classic T2 Repetition Set (no cushion, heels attached)
Part Number: 06-5742
Mason & Hamlin Standard Shank for tubular rail, ea.,
Part Number: 06-0027
WNG Classic T1 Repetition Set (heels attached)
Part Number: 06-5027
WNG Classic T2 Repetition Set (w/cushion, heels not attached)
Part Number: 06-5757
Baldwin Short Shank & Flange Set, Flex 2
Part Number: 06-5105-20
Assembled Vertical Piano Action
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5805
Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)
Part Number: 06-5291-10
Renner Type / Baldwin Long Shank, ea., Flex 1
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-0194
Unassembled Grand Piano Top Action
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5803
Kawai T1 Shank & Flange Set, Flex 1
Part Number: 06-5289-10
Assembled Grand Piano Top Action
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5800
Damper Action Installation Tool Kit
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
![](/skin/frontend/default/wng/images/damper installation measuring.png)
Damper Action Measuring Tool
This invaluable tool quickly and easily performs the following operations:- 1. Tells you if a WNG damper action will fit inside your piano.
- 2. Helps you pick the correct spoon length for your piano.
- 3. Gives you the correct mounting block thickness for mounting to the belly rail.
![](/skin/frontend/default/wng/images/damper installation punch.png)
Damper Flange Rail Punch
The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.Under Lever Center Height Gauge
![](/skin/frontend/default/wng/images/damper installation height gauge.png)
This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.
Damper Pickup Half Stroke Gauge
![](/skin/frontend/default/wng/images/damper installation half stroke.png)
The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.
Part Number: 06-5675
Scale Stick Kit
Please send all completed Scale Sticks to: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834
Part Number: 06-5806
Regulating Tool Kit
Drop Screwdriver
Unlike most drop screwdrivers, WNG's are intentionally made to be very short. This allows the technician to easily steady his hand on the shank flanges while regulating. WNG also offers two different versions of its Drop Screwdriver--one with a barrel and one without. The barrel helps to locate the tool on the drop screw, however, some technicians prefer not to have this barrel.![backcheck](/skin/frontend/default/wng/images/3 - drop screw driver - 120210.png)
Balancier and Jack Regulating Tool
The handle and tool tip are the same on WNG's Jack and Balancier Regulating Tools--the only difference between the two are their lengths. The Jack Regulating Tool is the ideal length to reach in to the regulating screw on the jack.![backcheck](/skin/frontend/default/wng/images/4 - balancier & jack - 120210.png)
Let-Off
The WNG Let-Off Tool allows you to adjust let-off button eye screws during a bench regulation. The tool's length is ideal for steadying your hand on the shank flanges and its tip is relieved so that it will not bind on the regulating screw. *Please note that the WNG Let-Off Tool is designed for setting let-off on actions that use an eye screw. It is not the appropriate tool for dowel regulating buttons.*![backcheck](/skin/frontend/default/wng/images/5 - let-off - 120210.png)
Damper Hook
Typically, piano technicians remove the damper to make the topbend--a process that is highly inefficient. When pianos are being manufactured, factory damper installer workers make this same bend while the damper is inside the piano, resulting is much less wasted time. WNG's Damper Hook enables piano technicians everywhere to use the factory's efficient method of making topbend while the damper is still inside the piano.![backcheck](/skin/frontend/default/wng/images/6 - damper hook - 120210.png)
Dimension Gauges
WNG provides both metric and English gauges with the most common regulating dimensions used in bench regulations.![backcheck](/skin/frontend/default/wng/images/7 - dimension gauges - 120210.png)
Backcheck Bender
The WNG Backcheck Bender was designed to be a comfortable yet functional tool with a slot to grip backcheck wire firmly and a tip with the ideal angle for bending backcheck wires.![backcheck](/skin/frontend/default/wng/images/8 - backcheck bender - 120210.png)
Part Number: 06-5670
Precision Analog Tension Gram Dial Gauge (150g)
Part Number: 06-0335
Precision Analog Tension Gram Dial Gauge (5g)
Part Number: 06-0334
Sostenuto Kit
Click here to download the Sostenuto Installation Procedure.
Part Number: 06-0341
Custom Damper Action (Assembled)
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5801
Custom Damper Action (Unassembled)
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5802
WNG Classic T1 Repetition Set (heels not attached)
Part Number: 06-5028
WNG Classic T2 Repetition Set (w/cushions, heels attached)
Part Number: 06-5756
Capstan Set (Old Steinway)
Part Number: 06-5355
Precision Analog Tension Gram Dial Gauge (10g)
Part Number: 06-0336
Adjustable Plate Perimeter Bolt (54mm/2.128")
Part Number: 06-5302
Adjustable Plate Perimeter Bolt (46mm/1.811")
Part Number: 06-5301
Standard Backchecks (for angled holes)
Part Number: 06-5201
WNG Classic T1 Repetition Set (w/cushion, heels not attached)
Part Number: 06-5010
Steinway Type 4 Shank & Flange Set,
Part Number: 06-5103-10
Steinway Type 3 Shank & Flange Set,
Part Number: 06-5102-10
WNG Sample Parts Kit
Part Number: 06-5231
Adjustable Plate Perimeter Bolt (38mm/1.500")
Part Number: 06-5300
Capstan Set (Standard)
Part Number: 06-5303
Knabe T1 Shank & Flange Set,
Part Number: 06-5111-10
Renner Type / Baldwin Long Shank & Flange Set,
Part Number: 06-5110-10
Wessell, Nickel & Gross Classic Shank & Flange Set,
Part Number: 06-5109-10
Mason & Hamlin Shank & Flange Set for Tubular Rail,
Part Number: 06-5108-10
Young Chang / Yamaha Shank & Flange Set,
Part Number: 06-5107-10
Baldwin Short Shank & Flange Set,
Part Number: 06-5105-10
Aeolian Mason & Hamlin Shank & Flange Set,
Part Number: 06-5104-10
WNG Classic T1 Repetition Set (w/cushion, heels attached)
Part Number: 06-5001
Custom Repetition Set
Part Number: 06-5008
Standard Backchecks (for vertical holes)
Part Number: 06-5200