Search results for 'key level stick'

Gram weight set

WNG Piano Pounder allows rebuilders to achieve a stable regulation for pianos

Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools

---

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

---

Key frame bedding tool

Steinway Keyboard, S,M,L,O

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Unassembled Top Action you can either use the online ordering form below or use the PDF Unassembled Hammer Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Assembled Top Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

---

Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

---

Understanding that most piano rebuilders have little-to-no experience installing damper actions, Wessell, Nickel & Gross has developed a comprehensive set of tools and procedures to help them install a WNG Damper Action into any piano. The Damper Installation Kit includes a Damper Action Measuring Tool, a Damper Flange Rail Punch, an Under Lever Center Height Gauge, and a Damper Pickup Half Stroke Gauge. The kit is meant to be used with WNG’s Damper Action Installation Procedure, which is divided into seven parts and can be found below.

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles

---

Damper Action Measuring Tool

This invaluable tool quickly and easily performs the following operations:

• 1. Tells you if a WNG damper action will fit inside your piano.
• 2. Helps you pick the correct spoon length for your piano.
• 3. Gives you the correct mounting block thickness for mounting to the belly rail.


Damper Flange Rail Punch

The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.

Under Lever Center Height Gauge



This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.

Damper Pickup Half Stroke Gauge



The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.

---

This kit contains everything that a piano technician needs to create a scale stick using WNG's instructions. If you need help on how to create a Scale Stick, please download WNG's instructions below.

Please send all completed Scale Sticks to: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Key Pin Tool Set

Adjustable Weighted Key Dip Block