Search results for 'balance rail pin'
Flange Screw - M4 x 15 mm - set of 90
Part Number: 06-0346
WNG Pounder
Part Number: 06-5515
Vertical Piano Action, Complete package
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB
Part Number: 06-5804
Tuning Pin, #3-0 X 63.5 mm / 2.5 in - Set of 250
Part Number: 06-5179
Tuning Pin, #3-0 X 60.5 mm / 2.38 in - Set of 250
Part Number: 06-5178
Tool set, Vertical Action Installation
Part Number: 06-5990
Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
Part Number: 06-5108-21
Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Part Number: 06-0570
Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
Part Number: 06-5108-20
Mason & Hamlin Standard Shank for tubular rail, ea.,
Part Number: 06-0027
Damper Action Tapping Kit
Part Number: 06-5919
Tap (taper), M4 x 0.7, Damper Action rail
Part Number: 06-0559
Assembled Vertical Piano Action
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5805
Tuning Pin, #4-0 X 63.5 mm / 2.5 in - Set of 250
Part Number: 06-5177
Tuning Pin, #4-0 X 60.5 mm / 2.38 in - Set of 250
Part Number: 06-5176
Tuning Pin, #2-0 X 63.5 mm / 2.5 in - Set of 250
Part Number: 06-5175
Tuning Pin, #2-0 X 60.5 mm / 2.38 in - Set of 250
Part Number: 06-5174
Double Panel 7-Ply Pinblock (1.500"/38.1mm)
Part Number: 06-5481
Single Panel 7-Ply Pinblock (1.500"/38.1mm)
Part Number: 06-5480
Single Panel 5-Ply Pinblock (1.500"/38.1mm)
Part Number: 06-5478
Double Panel 5-Ply Pinblock (1.500"/38.1mm)
Part Number: 06-5479
Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-5108-11
Unassembled Grand Piano Top Action
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5803
Front Rail Pin Set (American Std Long)
Part Number: 06-5318
Assembled Grand Piano Top Action
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5800
Double Panel 7-Ply Pinblock (1.625"/41.3mm)
Part Number: 06-5477
Double Panel 7-Ply Pinblock (1.375"/34.9mm)
Part Number: 06-5476
Single Panel 7-Ply Pinblock (1.625"/41.3mm)
Part Number: 06-5475
Single Panel 7-Ply Pinblock (1.375"/34.9mm)
Part Number: 06-5474
Single Panel 5-Ply Pinblock (1.625"/41.3mm)
Part Number: 06-5466
Double Panel 5-Ply Pinblock (1.625"/41.3mm)
Part Number: 06-5469
Damper Action Installation Tool Kit
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
Damper Action Measuring Tool
This invaluable tool quickly and easily performs the following operations:- 1. Tells you if a WNG damper action will fit inside your piano.
- 2. Helps you pick the correct spoon length for your piano.
- 3. Gives you the correct mounting block thickness for mounting to the belly rail.
Damper Flange Rail Punch
The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.Under Lever Center Height Gauge
This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.
Damper Pickup Half Stroke Gauge
The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.
Part Number: 06-5675
Scale Stick Kit
Please send all completed Scale Sticks to: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834
Part Number: 06-5806
Precision Analog Tension Gram Dial Gauge (5g)
Part Number: 06-0334
Center Pin Tool
Part Number: 06-5375
Custom Damper Action (Assembled)
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5801
Custom Damper Action (Unassembled)
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5802
WNG Modern Repetition Set (no cushion, heels not attached)
Part Number: 06-5032
WNG Modern Repetition Set (no cushion, heels attached)
Part Number: 06-5031
WNG Modern Repetition Set (w/cushion, heels not attached)
Part Number: 06-5030
WNG Modern Repetition Set (w/cushion, heels attached)
Part Number: 06-5029
Renner Type Long Flange Repetition Set (no cushion, heels not attached)
Part Number: 06-5024
Renner Type Long Flange Repetition Set (no cushion, heels attached)
Part Number: 06-5023
Double Panel 5-Ply Pinblock (1.25"/31.8mm)
Part Number: 06-5467
Single Panel 5-Ply Pinblock (1.25"/31.8mm)
Part Number: 06-5464
Single Panel 5-Ply Pinblock (1.375"/34.9mm)
Part Number: 06-5465
Double Panel 5-Ply Pinblock (1.375"/34.9mm)
Part Number: 06-5468
Precision Analog Tension Gram Dial Gauge (10g)
Part Number: 06-0336
Front Rail Pin Set (European Std)
Part Number: 06-5312
Balance Rail Pin Set (Old Steinway Long)
Part Number: 06-5309
Balance Rail Pin Set (Old Steinway Short)
Part Number: 06-5308
Balance Rail Pin Set (European Std Long)
Part Number: 06-5307
Balance Rail Pin Set (European Std Short)
Part Number: 06-5315
Balance Rail Pin Set (American Std Long)
Part Number: 06-5305
Renner Type Schwander Repetition Set (no cushion, heels not attached)
Part Number: 06-5015
Renner Type Short Flange Repetition Set (no cushion, heels not attached)
Part Number: 06-5013
Mason & Hamlin Repetition Set for Tubular Rail (heels not attached)
Part Number: 06-5011
Center Pins (#22-1/2)
Part Number: 06-0249
Center Pins (#22)
Part Number: 06-0248
Center Pins (#23-1/2)
Part Number: 06-0251
Center Pins (#23)
Part Number: 06-0250
Center Pins (#21-1/2)
Part Number: 06-0247
Center Pins (#21)
Part Number: 06-0246
Center Pins (#20-1/2)
Part Number: 06-0245
Center Pins (#20)
Part Number: 06-0244
Center Pins (#19-1/2)
Part Number: 06-0243
Center Pins (#19)
Part Number: 06-0242
Center Pins (#18-1/2)
Part Number: 06-0241