Search results for 'american standard long'

Tool, Standard Gram weight set
Gram weight set

Part Number: 06-5782

WNG Pounder
WNG Piano Pounder allows rebuilders to achieve a stable regulation for pianos

Part Number: 06-5515

Vertical Piano Action, Complete package
Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

Part Number: 06-5804

Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached
Features low leverage, a large knuckle, and a Baldwin T2 flange. Without knuckles attached. Set of 90.

Part Number: 06-5430-11

Baldwin T2 Short Shank & Flange Set, Flex 1
Features low leverage, a large knuckle, and a Baldwin T2 flange. Set of 90.

Part Number: 06-5430-10

Center Pins,Hrd Bush., 1.268Lmm, Set/100
Stainless Steel,1.268mm long

Part Number: 06-5160

Steinway Repetition Set (no cushion, heels not attached)
Replaces Steinway repetitions. No rest cushion, Heels are not attached. Set of 90.

Part Number: 06-5299

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Knuckles included but not attached. Set of 90.

Part Number: 06-5291-21

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Set of 90.

Part Number: 06-5291-20

Kawai T1 Shank & Flange Set, Flex 2
Features a large knuckle and a Kawai T1 flange. Flex2. Set of 90.

Part Number: 06-5289-20

Knabe T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Knabe T1 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5111-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Renner flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5110-21

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Young Chang / Yamaha Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Yamaha flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5107-21

Steinway Type 4 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5103-21

Steinway Type 3 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Hamburg flange. Kuckles are included but not attached. Set of 90.

Part Number: 06-5102-21

Steinway Type 2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features medium leverage, a large knuckle, and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5101-21

Steinway Type 1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features high leverage, a medium knuckle, and a New York flange. Knuckle are included but not attached. Set of 90.

Part Number: 06-5100-21

Young Chang / Yamaha Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Yamaha flange. Set of 90.

Part Number: 06-5107-20

WNG Standard Shank, ea., Flex 2
Features low leverage, a large knuckle, and a WNG flange. 1 each

Part Number: 06-0571

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2 (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Set of 90. Knuckles not attached

Part Number: 06-5109-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2
For pre-Aeolian Mason & Hamlin and other pianos. Features low leverage, a large knuckle and a WNG flange. Set of 90.

Part Number: 06-5109-20

Steinway Type 5 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-21

Steinway Type 5 Shank & Flange Set, Flex 2
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-20

Steinway Type 4 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5103-20

Steinway Type 3 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Hamburg flange. Set of 90.

Part Number: 06-5102-20

Steinway Type 2 Shank & Flange Set, Flex 2
Features medium leverage, a large knuckle, and a New York flange. Set of 90.

Part Number: 06-5101-20

Steinway Type 1 Shank & Flange Set, Flex 2
Features high leverage, a medium knuckle, and a New York flange. Set of 90.

Part Number: 06-5100-20

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Knabe T1 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Knabe T1 flange. Set of 90.

Part Number: 06-5111-20

Kawai T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a Kawai T1 flange. Knuckles not attached. Set of 90.

Part Number: 06-5289-21

Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Baldwin flange. Flex2, Knuckles included but not attached. Set of 90.

Part Number: 06-5105-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Renner flange. Set of 90.

Part Number: 06-5110-20

Aeolian T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5104-21

Aeolian Mason & Hamlin Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.

Part Number: 06-5104-20

WNG Classic T2 Repetition Set (no cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm, no cushions,Heels are not attached. Set of 90.

Part Number: 06-5743

WNG Classic T2 Repetition Set (no cushion, heels attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. no cushions, 24 mm Heels are attached. Set of 90.

Part Number: 06-5742

Steinway Repetition Set (tall rest cushion, heels not attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are included, but not attached. Set of 90.

Part Number: 06-5754

Steinway Repetition Set (tall rest cushion, heels attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are attached. Set of 90.

Part Number: 06-5753

Mason & Hamlin Standard Shank for tubular rail, ea.,
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

WNG Classic T1 Repetition Set (heels attached)
Replaces Wessell, Nickel & Gross T1 repetitions that use the Classic WNG Jack. Heels are attached. Set of 90.

Part Number: 06-5027

WNG Classic T2 Repetition Set (w/cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm with cushions,Heels are not attached. Set of 90.

Part Number: 06-5757

Aeolian T2 Repetition Set (no cushion, heels not attached)
Aeolian T2. no cushion, Heels not attached. Set of 90.

Part Number: 06-5752

Baldwin Clemson Repetition Set T2 (heels attached)
Replaces Baldwin Clemson T2 style repetitions. Heels are attached. Set of 90.

Part Number: 06-5033

Baldwin Short Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Baldwin flange . Set of 90. More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5105-20

Center Pins,Hrd Bush., 1.272Lmm, Set/100
Stainless Steel,1.272mm long

Part Number: 06-5161

Steinway Type 5 Shank & Flange Set, (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-11

Steinway Type 5 Shank & Flange Set, Flex 1
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-10

Let-off Screw - 38 mm - long - set of 90
1 Let-off Screw (38 mm)

Part Number: 06-5287

Aeolian / Chickering Repetition Set (no cushion, no heels)
Replaces Aeolian / Chickering repetitions. No cushion, no heels. Set of 90.

Part Number: 06-5745

Aeolian / Chickering Repetition Set (no cushion, heels included)
Replaces Aeolian / Chickering repetitions. No cushion, heels included. Set of 90.

Part Number: 06-5744

Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Set of 90.

Part Number: 06-5291-10

WNG Grand Shank/Butt assembly, W- knuckle, Set of 90
Grand Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size and knuckle position.

Part Number: 06-5298

WNG Shank/Butt assembly, W/O knuckle, Set of 90
Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size.

Part Number: 06-5297

WNG Shank Flange
Shank flange, WNG

Part Number: 06-0099

Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features a medium knuckle, and a Mason & Hamlin flange. Set of 90. Kuckles not attached More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5108-11

Wessell, Nickel & Gross Classic Shank & Flange Set, (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Knuckles not attached. Set of 90.

Part Number: 06-5109-11

Kawai T1 Repetition Set (heels not attached)
Replaces Kawai T1 style repetitions. Heels are included, but not attached. Set of 90.

Part Number: 06-5747

Kawai T1 Repetition Set (heels attached)
Replaces Kawai T1 style repetitions. Heels are attached. Set of 90.

Part Number: 06-5746

Kawai T1 Shank & Flange Set, Flex 1
Features low leverage, a large knuckle and a Kawai T1 flange. Set of 90.

Part Number: 06-5289-10

Center Pins,Hrd Bush., 1.290Lmm, Set/100
Stainless Steel,1.290mm, long

Part Number: 06-5159

Center Pins,Hrd Bush., 1.285Lmm, Set/100
Stainless Steel,1.285mm, long

Part Number: 06-5157

Center Pins,Hrd Bush., 1.280Lmm, Set/100
Stainless Steel,1.280mm, long

Part Number: 06-5155

Center Pins,Hrd Bush., 1.275Lmm, Set/100
Stainless Steel,1.275mm, long

Part Number: 06-5153

Center Pins,Hrd Bush., 1.270Lmm, Set/100
Stainless Steel,1.270mm long

Part Number: 06-5151

Drill Bit, 13/32" Perimeter bolt
Perimeter bolt drill bit, Long length. 13/32"

Part Number: 06-5624

Front Rail Pin Set (American Std Long)
Set of 90 front rail pins. American Std Long, 3.71mm x 43mm.

Part Number: 06-5318

Tool, Allen 5/16" or 8mm
5/16" (8mm) Long "T" Handle Allen Wrench, ideal for inserting and adjusting Perimeter Bolts.

Part Number: 06-5625

Damper Wires (Long, individual)
N/A

Part Number: 06-0340

Center Pin Tool
The most notable refinement we’ve made to this familiar tool is in its smoothness. Typically this tool has unpolished steel rods that slide inside holes in the bare aluminum itself. That just means too much friction can develop and possible binding, even when lubricated. So you have to work that much harder, placing unnecessary stress and strain on your hand and forearm especially when repinning complete sets of parts. We’ve polished the steel rods and added bronze bushings for them to slide in. Because of the smoother non-binding operation we are able to use a lighter gauge spring for further stress reduction. Has a replaceable screw-in pushpin. Finish is black anodized aluminum to keep the metal from staining your hands during extended use. WNG logo is laser etched.

Part Number: 06-5375

WNG Modern Repetition Set (no cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5032

WNG Modern Repetition Set (no cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5031

WNG Modern Repetition Set (w/cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5030

WNG Modern Repetition Set (w/cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5029

WNG Classic T1 Repetition Set (heels not attached)
Replaces Wessell, Nickel & Gross T1 repetitions that use the Classic WNG Jack. Heels are included, but not attached. Set of 90.

Part Number: 06-5028

WNG Classic T2 Repetition Set (w/cushions, heels attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. with cushions, 24 mm Heels are attached. Set of 90.

Part Number: 06-5756

Renner Type Long Flange Repetition Set (no cushion, heels not attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are included, but not attached. Set of 90.

Part Number: 06-5024

Renner Type Long Flange Repetition Set (no cushion, heels attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are attached. Set of 90.

Part Number: 06-5023

Renner Type Long Flange Repetition Set (w/cushion, heels not attached)
Replaces Renner Type repetitions that use an integrated rest cushion and a long flange. Heels are not attached. Set of 90.

Part Number: 06-5026

Renner Type Long Flange Repetition Set (w/cushion, heels attached)
Replaces Renner Type repetitions that use an integrated rest cushion and a long flange. Heels are attached. Set of 90.

Part Number: 06-5025