Search results for 'shanks and flanges'

Seven ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Seven ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Five ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Seven ply double panel ultimate pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Seven ply double panel ultimate pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).

Seven ply single panel ultimate pinblock. 1 5/8" x 59" x 11 1/2" - 5 1/2" (41.3mm x 1498.6mm x 292.1mm - 139.7mm).

Seven ply single panel ultimate pinblock. 1 3/8" x 59" x 11 1/2" - 5 1/2" (34.9mm x 1498.6mm x 292.1mm - 139.7mm).

Five ply single panel value pinblock. 1 5/8" x 59" x 11 1/2"-5.6" (41.3mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Pinblocks made in Mason & Hamlin Haverhill, Ma factory from quarter-sawn maple are prized by tuners for their "pin feel". Made with five plies of carefully dried and quarter-sawn New England hard rock maple, this pinblock is a good choice. Water resistant glue and quarter-sawn maple makes this block truly durable.

Five ply single panel value pinblock. 1 1/4" x 59" x 11 1/2"-5.6" (31.8mm x 1498.6mm x 292.1mm-142.2mm).

Five ply single panel value pinblock. 1 3/8" x 59" x 11 1/2"-5.6" (34.9mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).

One #10 bridge pin drill bit.

One #9 bridge pin drill bit.

One #8 bridge pin drill bit.

One #7 bridge pin drill bit.

The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.

The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.

One #6 bridge pin drill bit.

Set of three leg plate assemblies with mounting screws.

WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.

The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.

For use on pianos 8' (244cm) and larger, with legs cut to the proper length for the added height of the caster. Set of three includes two casters with a brake and one caster without a brake. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*

Our best general purpose caster for all grand pianos. Set of three includes two casters with a brake and one caster without a brake. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*

For use on pianos up to 7" or 213cm. Set of three. *Please note that this item is back ordered, call (916) 567-9999 x727 for estimated ship date*