Search results for 'balance rail pin'

Flange Screw - M4 x 15 mm - set of 90 for WNG aluminum action rails

Tuning Pin, # 3-0 x 63.5 mm / 2.5 in. Set of 250.

Tuning Pin, # 3-0 x 60.5 mm / 2.38 in. Set of 250.

Tuning Pin, # 4-0 x 63.5 mm / 2.5 in. Set of 250.

Tuning Pin, # 4-0 x 60.5 mm / 2.38 in. Set of 250.

Tuning Pin, # 2-0 x 63.5 mm / 2.5 in. Set of 250.

Tuning Pin, # 2-0 x 60.5 mm / 2.38 in. Set of 250.

Seven ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Seven ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Five ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Seven ply double panel ultimate pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Seven ply double panel ultimate pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).

Seven ply single panel ultimate pinblock. 1 5/8" x 59" x 11 1/2" - 5 1/2" (41.3mm x 1498.6mm x 292.1mm - 139.7mm).

Seven ply single panel ultimate pinblock. 1 3/8" x 59" x 11 1/2" - 5 1/2" (34.9mm x 1498.6mm x 292.1mm - 139.7mm).

Five ply single panel value pinblock. 1 5/8" x 59" x 11 1/2"-5.6" (41.3mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Pinblocks made in Mason & Hamlin Haverhill, Ma factory from quarter-sawn maple are prized by tuners for their "pin feel". Made with five plies of carefully dried and quarter-sawn New England hard rock maple, this pinblock is a good choice. Water resistant glue and quarter-sawn maple makes this block truly durable.

Five ply single panel value pinblock. 1 1/4" x 59" x 11 1/2"-5.6" (31.8mm x 1498.6mm x 292.1mm-142.2mm).

Five ply single panel value pinblock. 1 3/8" x 59" x 11 1/2"-5.6" (34.9mm x 1498.6mm x 292.1mm-142.2mm).

Five ply double panel value pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).

One #10 bridge pin drill bit.

One #9 bridge pin drill bit.

One #8 bridge pin drill bit.

One #7 bridge pin drill bit.

Set of 100 3.1mm x 25mm polished stainless steel bridge pins.

Set of 100 2.8mm x 25mm polished stainless steel bridge pins.

Set of 100 2.5mm x 25mm polished stainless steel bridge pins.

Set of 100 2.2mm x 25mm polished stainless steel bridge pins.

One #6 bridge pin drill bit.

WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.