Search results for 'wire'

Dowel Capstan *- Composite head and steel wire (overall length 4").

Set of Vertical action installation tools.

Damper Heads, Polish (75/set 26/Bass)

N/A

Damper Heads, Polish (75/set 32/Bass)

N/A

N/A

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

---

What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.

---

Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.

• 1. Aluminum Tapping Fluid
• 2. 3.3 Drill Bit
• 3. M4.7mm Thread Tap
• 4. Damper hole tapping kit (includes all of the above)

---

Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.

---

Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:

• 1. Selecting the correct WNG damper action
• 2. Create a damper action scale stick from the back of the keys
• 3. Drill the WNG damper flange rail
• 4. Drill the WNG damper sustain tray
• 5. Assemble the damper action
• 6. Install the damper action
• 7. Determine underlever center height using half stroke principles
• Sostenuto Installation Procedure
• Repetition Helper Spring Installation

---

"German Silver" 0.055" (1.40mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.54" (1.37mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.057" (1.45mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.056" (1.42mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.053" (1.35mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.052" (1.32mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.051" (1.30mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.050" (1.27mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.049" (1.24mm) center pins, sold by the ounce.

"German Silver" 0.048" (1.22mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.047" (1.19mm) center pins, sold by the ounce (28.35 g).

"German Silver" 0.046" (1.17mm) center pins, sold by the ounce (28.35 g).