Search results for 'steel'
Capstan, Dowel for Vertical Pianos, Set of 90
Dowel Capstan *- Composite head and steel wire (overall length 4").
Part Number: 06-0508
Tuning Pin, #3-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 3-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5179
Tuning Pin, #3-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 3-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5178
Drill Bit - Hammer Boring, Flex 3
One drill bit. 3.6 mm for flex 3 shank tubes.
Part Number: 06-5662
Drill Bit - Hammer Boring, Flex 2
One drill bit. 4.15 mm for flex 2 shank tubes.
Part Number: 06-5661
Tool set, Vertical Action Installation
Set of Vertical action installation tools.
Part Number: 06-5990
Tap (taper), M4 x 0.7, Damper Action rail
Tap (taper), M4 x 0.7, Damper Action rail
Part Number: 06-0559
Tuning Pin, #4-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 4-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5177
Tuning Pin, #4-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 4-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5176
Tuning Pin, #2-0 X 63.5 mm / 2.5 in - Set of 250
Tuning Pin, # 2-0 x 63.5 mm / 2.5 in. Set of 250.
Part Number: 06-5175
Tuning Pin, #2-0 X 60.5 mm / 2.38 in - Set of 250
Tuning Pin, # 2-0 x 60.5 mm / 2.38 in. Set of 250.
Part Number: 06-5174
Tool, Allen 5/16" or 8mm
5/16" (8mm) Long "T" Handle Allen Wrench, ideal for inserting and adjusting Perimeter Bolts.
Part Number: 06-5625
Center Pin Tool
The most notable refinement we’ve made to this familiar tool is in its smoothness. Typically this tool has unpolished steel rods that slide inside holes in the bare aluminum itself. That just means too much friction can develop and possible binding, even when lubricated. So you have to work that much harder, placing unnecessary stress and strain on your hand and forearm especially when repinning complete sets of parts.
We’ve polished the steel rods and added bronze bushings for them to slide in. Because of the smoother non-binding operation we are able to use a lighter gauge spring for further stress reduction. Has a replaceable screw-in pushpin. Finish is black anodized aluminum to keep the metal from staining your hands during extended use. WNG logo is laser etched.
Part Number: 06-5375
Adjustable Plate Perimeter Bolt (46mm/1.811")
The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.
Part Number: 06-5301
Standard Backchecks (for angled holes)
Set of 90 composite 88mm backchecks for angled holes.
Part Number: 06-5201
Bridge Pin Set (#10)
Set of 100 3.1mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0237
Bridge Pin Set (#9)
Set of 100 2.8mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0236
Bridge Pin Set (#8)
Set of 100 2.5mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0235
Bridge Pin Set (#7)
Set of 100 2.2mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0234
Adjustable Plate Perimeter Bolt (38mm/1.500")
The WNG Adjustable Plate Perimeter Bolt allows height to be set through the perimeter bolt hole in the plate using an 8mm Allen Wrench. The cap bolt threads into the perimeter bolt below the hex for easy tightening.
Part Number: 06-5300
Bridge Pin Set (#6)
Set of 100 2.0mm x 25mm polished stainless steel bridge pins.
Part Number: 06-0233
Standard Backchecks (for vertical holes)
Set of 90 composite 83mm backchecks for vertical holes.
Part Number: 06-5200