Search results for: 'mason hamlin'

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)

For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2 (knuckles not attached)

For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Set of 90. Knuckles not attached

Part Number: 06-5109-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2

For pre-Aeolian Mason & Hamlin and other pianos. Features low leverage, a large knuckle and a WNG flange. Set of 90.

Part Number: 06-5109-20

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2

Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2

For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Aeolian Mason & Hamlin Shank & Flange Set, Flex 2

Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.

Part Number: 06-5104-20

Mason & Hamlin Standard Shank for tubular rail, ea.,

Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

Double Panel 7-Ply Pinblock (1.500"/38.1mm)

Seven ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Part Number: 06-5481

Single Panel 7-Ply Pinblock (1.500"/38.1mm)

Seven ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5480

Single Panel 5-Ply Pinblock (1.500"/38.1mm)

Five ply single panel value pinblock. 1 1/2" x 59" x 11 1/2"-5.6" (38.1mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5478

Double Panel 5-Ply Pinblock (1.500"/38.1mm)

Five ply double panel value pinblock. 1 1/5" x 59" x 17" (38.1mm x 1498.6mm x 431.8mm).

Part Number: 06-5479

Aeolian Mason & Hamlin Shank & Flange Set, (knuckles not attached)

Features a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5104-11

Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)

For Mason & Hamlin Pianos with serial number 90,000 and above. Features a medium knuckle, and a Mason & Hamlin flange. Set of 90. Kuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5108-11

Wessell, Nickel & Gross Classic Shank & Flange Set, (knuckles not attached)

For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Knuckles not attached. Set of 90.

Part Number: 06-5109-11

Double Panel 7-Ply Pinblock (1.625"/41.3mm)

Seven ply double panel ultimate pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Part Number: 06-5477

Single Panel 7-Ply Pinblock (1.375"/34.9mm)

Seven ply single panel ultimate pinblock. 1 3/8" x 59" x 11 1/2" - 5 1/2" (34.9mm x 1498.6mm x 292.1mm - 139.7mm).

Part Number: 06-5474

Single Panel 5-Ply Pinblock (1.625"/41.3mm)

Five ply single panel value pinblock. 1 5/8" x 59" x 11 1/2"-5.6" (41.3mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5466

Double Panel 5-Ply Pinblock (1.625"/41.3mm)

Five ply double panel value pinblock. 1 5/8" x 59" x 17" (41.3mm x 1498.6mm x 431.8mm).

Part Number: 06-5469

Repetition Helper Spring Kit (short 22mm)

N/A

Part Number: 06-5731

Repetition Helper Spring Kit (long 26mm)

N/A

Part Number: 06-5730

Double Panel 5-Ply Pinblock (1.25"/31.8mm)

Pinblocks made in Mason & Hamlin Haverhill, Ma factory from quarter-sawn maple are prized by tuners for their "pin feel". Made with five plies of carefully dried and quarter-sawn New England hard rock maple, this pinblock is a good choice. Water resistant glue and quarter-sawn maple makes this block truly durable.

Part Number: 06-5467

Single Panel 5-Ply Pinblock (1.25"/31.8mm)

Five ply single panel value pinblock. 1 1/4" x 59" x 11 1/2"-5.6" (31.8mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5464

Single Panel 5-Ply Pinblock (1.375"/34.9mm)

Five ply single panel value pinblock. 1 3/8" x 59" x 11 1/2"-5.6" (34.9mm x 1498.6mm x 292.1mm-142.2mm).

Part Number: 06-5465

Double Panel 5-Ply Pinblock (1.375"/34.9mm)

Five ply double panel value pinblock. 1 3/8" x 59" x 17" (34.9mm x 1498.6mm x 431.8mm).

Part Number: 06-5468

Mason & Hamlin Aeolian Repetition Set (heels not attached)

Replaces Aeolian Mason & Hamlin repetitions. Heels are included, but not attached. Set of 90.

Part Number: 06-5012

Mason & Hamlin Repetition Set for Tubular Rail (heels not attached)

Replaces current Mason & Hamlin repetitions (serial number 90,000 and above). Heels are included, but not attached. Set of 90.

Part Number: 06-5011

WNG Sample Parts Kit

WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.

Part Number: 06-5231

Search results for 'mason hamlin'