Search results for: 'hammer shanks'

WNG Natural Vertical Hammers, Gross 4

N/A

Part Number: 06-5446

Shanks, Vertical Set of 90

Vertical Hammer Shanks

Part Number: 06-5683

Tool, Hammer Extraction

Hammer Extraction tool

Part Number: 06-5824

Steinway Shank & Flange, ea., Flex 1

Features low leverage, a large knuckle, and Steinway flange. Each More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-0311

YC/Yamaha Vertical Hammer Butts - Composite - set of 90

YC/Yamaha Vertical hammer butts

Part Number: 06-5429

Vertical Piano Action, Complete package

Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

Part Number: 06-5804

Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached

Features low leverage, a large knuckle, and a Baldwin T2 flange. Without knuckles attached. Set of 90.

Part Number: 06-5430-11

Baldwin T2 Short Shank & Flange Set, Flex 1

Features low leverage, a large knuckle, and a Baldwin T2 flange. Set of 90.

Part Number: 06-5430-10

Drill Bit - Hammer Boring, Flex 3

One drill bit. 3.6 mm for flex 3 shank tubes.

Part Number: 06-5662

Drill Bit - Hammer Boring, Flex 2

One drill bit. 4.15 mm for flex 2 shank tubes.

Part Number: 06-5661

Tool set, Vertical Action Installation

Set of Vertical action installation tools.

Part Number: 06-5990

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Knuckles included but not attached. Set of 90.

Part Number: 06-5291-21

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)

Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Set of 90.

Part Number: 06-5291-20

Kawai T1 Shank & Flange Set, Flex 2

Features a large knuckle and a Kawai T1 flange. Flex2. Set of 90.

Part Number: 06-5289-20

Knabe T1 Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle and a Knabe T1 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5111-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle, and a Renner flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5110-21

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)

For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Young Chang / Yamaha Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle and a Yamaha flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5107-21

Custom Shank & Flange Set, Flex2 (knuckles not attached)

Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Knuckles not attached. Set of 90.

Part Number: 06-5106-21

Custom Shank & Flange Set, Flex2

Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Set of 90.

Part Number: 06-5106-20

Steinway Type 4 Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5103-21

Steinway Type 3 Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle, and a Hamburg flange. Kuckles are included but not attached. Set of 90.

Part Number: 06-5102-21

Steinway Type 2 Shank & Flange Set, Flex 2 (knuckles not attached)

Features medium leverage, a large knuckle, and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5101-21

Steinway Type 1 Shank & Flange Set, Flex 2 (knuckles not attached)

Features high leverage, a medium knuckle, and a New York flange. Knuckle are included but not attached. Set of 90.

Part Number: 06-5100-21

Young Chang / Yamaha Shank & Flange Set, Flex 2

Features low leverage, a large knuckle and a Yamaha flange. Set of 90.

Part Number: 06-5107-20

WNG Standard Shank, ea., Flex 2

Features low leverage, a large knuckle, and a WNG flange. 1 each

Part Number: 06-0571

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2 (knuckles not attached)

For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Set of 90. Knuckles not attached

Part Number: 06-5109-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2

For pre-Aeolian Mason & Hamlin and other pianos. Features low leverage, a large knuckle and a WNG flange. Set of 90.

Part Number: 06-5109-20

Steinway Type 5 Shank & Flange Set, Flex 2 (knuckles not attached)

Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-21

Steinway Type 5 Shank & Flange Set, Flex 2

Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-20

Steinway Type 4 Shank & Flange Set, Flex 2

Features low leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5103-20

Steinway Type 3 Shank & Flange Set, Flex 2

Features low leverage, a large knuckle, and a Hamburg flange. Set of 90.

Part Number: 06-5102-20

Steinway Type 2 Shank & Flange Set, Flex 2

Features medium leverage, a large knuckle, and a New York flange. Set of 90.

Part Number: 06-5101-20

Steinway Type 1 Shank & Flange Set, Flex 2

Features high leverage, a medium knuckle, and a New York flange. Set of 90.

Part Number: 06-5100-20

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2

Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2

For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Knabe T1 Shank & Flange Set, Flex 2

Features low leverage, a large knuckle and a Knabe T1 flange. Set of 90.

Part Number: 06-5111-20

Kawai T1 Shank & Flange Set, Flex 2 (knuckles not attached)

Features a large knuckle and a Kawai T1 flange. Knuckles not attached. Set of 90.

Part Number: 06-5289-21

Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle, and a Baldwin flange. Flex2, Knuckles included but not attached. Set of 90.

Part Number: 06-5105-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2

Features low leverage, a large knuckle, and a Renner flange. Set of 90.

Part Number: 06-5110-20

Aeolian T1 Shank & Flange Set, Flex 2 (knuckles not attached)

Features low leverage, a large knuckle and an Aeolian T2 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5104-21

Aeolian Mason & Hamlin Shank & Flange Set, Flex 2

Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.

Part Number: 06-5104-20

WNG Select Vertical Hammers, Gross 4

N/A

Part Number: 06-5445

Steinway Vertical Hammer Flange, Set of 90

Steinway Vertical Hammer flange. Set of 90

Part Number: 06-5685

Steinway Vertical Hammer Butt assembly, Set of 90

Steinway Vertical Hammer Butts. Set of 90

Part Number: 06-5684

Mason & Hamlin Standard Shank for tubular rail, ea.,

Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

Custom Shank & Flange Set, (knuckles not attached)

Create your own custom shank & flange set by choosing the knuckle size (Y), and flange (Z). Set of 90. More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5106-11

Baldwin Short Shank & Flange Set, Flex 2

Features low leverage, a large knuckle, and a Baldwin flange . Set of 90. More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5105-20

Assembled Vertical Piano Action

Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5805

WNG Natural Hammers, Gross 6

N/A

Part Number: 06-5449

Grand Hammer shanks - Carbon fiber - Flex 1 set of 90

Grand hammer shanks Flex 1

Part Number: 06-5635

11mm Composite Knuckles, Set of 90

11mm Composite Knuckles, set of 90

Part Number: 06-5473

Steinway Type 5 Shank & Flange Set, (knuckles not attached)

Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-11

Steinway Type 5 Shank & Flange Set, Flex 1

Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-10

Aeolian T2 Shank & Flange Set, Flex 1 (knuckles not attached)

Features a large knuckle and an Aeolian T2 flange. Set of 90. More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5291-11

Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)

Features low leverage, a large knuckle and an Aeolian T2 flange. Set of 90.

Part Number: 06-5291-10

WNG Grand Shank/Butt assembly, W- knuckle, Set of 90

Grand Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size and knuckle position.

Part Number: 06-5298

WNG Shank/Butt assembly, W/O knuckle, Set of 90

Part Number: 06-5109-11

Renner Type / Baldwin Long Shank & Flange Set (knuckles not attached)

Features a large knuckle, and a Renner flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5110-11

Knabe T1 Shank & Flange Set, (knuckles not attached)

Features a large knuckle and a Knabe T1 flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5111-11

Steinway Type 2 Shank & Flange Set, (knuckles not attached)

Features a large knuckle, and a New York flange. Set of 90. knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5101-11

Steinway Type 3 Shank & Flange Set, (knuckles not attached)

Features a large knuckle, and a Hamburg flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5102-11

Steinway Type 4 Shank & Flange Set, (knuckles not attached)

Features a large knuckle and a New York flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5103-11

Kawai T1 Shank & Flange Set, Flex 1 (knuckles not attached)

Features a large knuckle and a Kawai T1 flange. Set of 90. Knuckles not attached More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5289-11

Renner Type / Baldwin Long Shank, ea., Flex 1

Features low leverage, a large knuckle, and a Renner flange. Each More Information:

WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-0194

Unassembled Grand Piano Top Action

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Unassembled Top Action you can either use the online ordering form below or use the PDF Unassembled Hammer Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5803

10mm Composite Knuckles, Set of 90

10mm Composite Knuckles, set of 90

Part Number: 06-5472

9mm Composite Knuckles, Set of 90

9mm Composite Knuckles, set of 90

Part Number: 06-5471

8mm Composite Knuckles, Set of 90

8mm Composite Knuckles, set of 90

Part Number: 06-5470

WNG Lite Hammers, Gross 5

Special close-out price

Part Number: 06-5460

Kawai T1 Shank & Flange Set, Flex 1

Features low leverage, a large knuckle and a Kawai T1 flange. Set of 90.

Part Number: 06-5289-10

WNG Select Hammers, Gross 6

N/A

Part Number: 06-5463

WNG Natural Hammers, Gross 4

N/A

Part Number: 06-5454

WNG Natural Hammers, Gross 5

N/A

Part Number: 06-5455

Labor, Complete Hammer

Complete hammer labor. Includes boring, squaring, tailing, tapering, and hanging.

Part Number: 07-1002

Labor, Hammer Boring, Squaring, Tailing, and Tapering

Hammer labor. Includes boring, squaring, tailing, and tapering.

Part Number: 07-1001

Labor, Hammer boring

Hammer boring

Part Number: 07-1000

Assembled Grand Piano Top Action

Two Ways To Order *Please note that custom parts are non-refundable.* To order an Assembled Top Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.

Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.

Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5800

WNG Select Hammers, Gross 5

N/A

Part Number: 06-5462

Scale Stick Kit

This kit contains everything that a piano technician needs to create a scale stick using WNG's instructions. If you need help on how to create a Scale Stick, please download WNG's instructions below.

Download How to Create A Damper Action Scale Stick From Your Piano's Shank Rail

Download How to Create A Damper Action Scale Stick From Your Piano

Download Hammer Motion Calculator

Download How To Create A Damper Action Scale Stick From The Ends Of The Keys

Please send all completed Scale Sticks to: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834

Part Number: 06-5806

WNG Select Hammers, Gross 4

N/A

Part Number: 06-5461

Glue (CA Gel)

WNG recommends using its CA (CyanoAcrylate) glue for gluing hammers to its high performance carbon tube shanks and has worked hard to develop a glue that handles like traditional wooden glue that technicians are already familiar with—the methods and techniques required for attaching a hammer to a carbon tube shank using WNG CA Hammer Glue require little change for the experienced technician. WNG CA Hammer Glue is a gel and therefore highly viscous—it does not run when applied and fills gaps well. These properties make it ideal for conventional hammer boring and fitting techniques. The open time (when the glue is out of the tube and waiting to be used) and setup time (the time required for the glue to set after it has been applied) are similar to traditional glues and WNG CA Glue does not require accelerator. Additionally, WNG CA Glue is highly resistant to moisture, unlike traditional glues often used to hang hammers, making looser hammer heads much less likely.

Part Number: 06-0280

Capstan Set (Old Steinway)

Set of 90 lightweight, low-friction capstans for old Steinway shanks.

Part Number: 06-5355

Drill Bit - Hammer Boring, Flex 1

One drill bit. 4.9mm for flex 1 shank tubes.

Part Number: 06-5614

Steinway Type 4 Shank & Flange Set,

Features low leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5103-10

Steinway Type 3 Shank & Flange Set,

Features low leverage, a large knuckle, and a Hamburg flange. Set of 90.

Part Number: 06-5102-10

Steinway Type 2 Shank & Flange Set,

Features medium leverage, a large knuckle, and a New York flange. Set of 90.

Part Number: 06-5101-10

WNG Sample Parts Kit

WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.

Part Number: 06-5231

Treble Strike Gauge

One treble strike gauge.

Part Number: 06-0264

Search results for 'hammer shanks'