Search results for 'FLANGE'

Flange Rep WNG Classic T1
WNG Classic T1 Rep Flange

Part Number: 06-0100

Flange Screw - M4 x 15 mm - set of 90
Flange Screw - M4 x 15 mm - set of 90 for WNG aluminum action rails

Part Number: 06-0346

Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached
Features low leverage, a large knuckle, and a Baldwin T2 flange. Without knuckles attached. Set of 90.

Part Number: 06-5430-11

Baldwin T2 Short Shank & Flange Set, Flex 1
Features low leverage, a large knuckle, and a Baldwin T2 flange. Set of 90.

Part Number: 06-5430-10

Steinway Repetition Set (no cushion, heels not attached)
Replaces Steinway repetitions. No rest cushion, Heels are not attached. Set of 90.

Part Number: 06-5299

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Knuckles included but not attached. Set of 90.

Part Number: 06-5291-21

Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Set of 90.

Part Number: 06-5291-20

Kawai T1 Shank & Flange Set, Flex 2
Features a large knuckle and a Kawai T1 flange. Flex2. Set of 90.

Part Number: 06-5289-20

Knabe T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Knabe T1 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5111-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Renner flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5110-21

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Young Chang / Yamaha Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a Yamaha flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5107-21

Custom Shank & Flange Set, Flex2 (knuckles not attached)
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Knuckles not attached. Set of 90.

Part Number: 06-5106-21

Custom Shank & Flange Set, Flex2
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Set of 90.

Part Number: 06-5106-20

Steinway Type 4 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5103-21

Steinway Type 3 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Hamburg flange. Kuckles are included but not attached. Set of 90.

Part Number: 06-5102-21

Steinway Type 2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features medium leverage, a large knuckle, and a New York flange. Knuckles are included but not attached. Set of 90.

Part Number: 06-5101-21

Steinway Type 1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features high leverage, a medium knuckle, and a New York flange. Knuckle are included but not attached. Set of 90.

Part Number: 06-5100-21

Young Chang / Yamaha Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Yamaha flange. Set of 90.

Part Number: 06-5107-20

WNG Standard Shank, ea., Flex 2
Features low leverage, a large knuckle, and a WNG flange. 1 each

Part Number: 06-0571

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2 (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Set of 90. Knuckles not attached

Part Number: 06-5109-21

Wessell, Nickel & Gross Classic Shank & Flange Set, Flex 2
For pre-Aeolian Mason & Hamlin and other pianos. Features low leverage, a large knuckle and a WNG flange. Set of 90.

Part Number: 06-5109-20

Steinway Type 5 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-21

Steinway Type 5 Shank & Flange Set, Flex 2
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-20

Steinway Type 4 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5103-20

Steinway Type 3 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Hamburg flange. Set of 90.

Part Number: 06-5102-20

Steinway Type 2 Shank & Flange Set, Flex 2
Features medium leverage, a large knuckle, and a New York flange. Set of 90.

Part Number: 06-5101-20

Steinway Type 1 Shank & Flange Set, Flex 2
Features high leverage, a medium knuckle, and a New York flange. Set of 90.

Part Number: 06-5100-20

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Knabe T1 Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and a Knabe T1 flange. Set of 90.

Part Number: 06-5111-20

Kawai T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features a large knuckle and a Kawai T1 flange. Knuckles not attached. Set of 90.

Part Number: 06-5289-21

Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Baldwin flange. Flex2, Knuckles included but not attached. Set of 90.

Part Number: 06-5105-21

Renner Type / Baldwin Long Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Renner flange. Set of 90.

Part Number: 06-5110-20

Aeolian T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5104-21

Aeolian Mason & Hamlin Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.

Part Number: 06-5104-20

Steinway Vertical Damper Lever, Set of 75
Steinway Vertical Damper Lever. Set of 75

Part Number: 06-5686

Steinway Vertical Hammer Flange, Set of 90
Steinway Vertical Hammer flange. Set of 90

Part Number: 06-5685

Steinway Vertical Hammer Butt assembly, Set of 90
Steinway Vertical Hammer Butts. Set of 90

Part Number: 06-5684

WNG Classic T2 Repetition Set (no cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm, no cushions,Heels are not attached. Set of 90.

Part Number: 06-5743

WNG Classic T2 Repetition Set (no cushion, heels attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. no cushions, 24 mm Heels are attached. Set of 90.

Part Number: 06-5742

Steinway Repetition Set (tall rest cushion, heels not attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are included, but not attached. Set of 90.

Part Number: 06-5754

Steinway Repetition Set (tall rest cushion, heels attached)
Replaces Steinway repetitions. Tall rest cushion. Heels are attached. Set of 90.

Part Number: 06-5753

Mason & Hamlin Standard Shank for tubular rail, ea.,
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

WNG Classic T1 Repetition Set (heels attached)
Replaces Wessell, Nickel & Gross T1 repetitions that use the Classic WNG Jack. Heels are attached. Set of 90.

Part Number: 06-5027

WNG Classic T2 Repetition Set (w/cushion, heels not attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. 24 mm with cushions,Heels are not attached. Set of 90.

Part Number: 06-5757

Aeolian T2 Repetition Set (no cushion, heels not attached)
Aeolian T2. no cushion, Heels not attached. Set of 90.

Part Number: 06-5752

Baldwin Clemson Repetition Set T2 (heels attached)
Replaces Baldwin Clemson T2 style repetitions. Heels are attached. Set of 90.

Part Number: 06-5033

Baldwin Short Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Baldwin flange . Set of 90. More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5105-20

Steinway Type 5 Shank & Flange Set, (knuckles not attached)
Features a large knuckle and a New York flange. Knuckles not attached. Set of 90.

Part Number: 06-5380-11

Steinway Type 5 Shank & Flange Set, Flex 1
Features high leverage, a large knuckle and a New York flange. Set of 90.

Part Number: 06-5380-10

Aeolian / Chickering Repetition Set (no cushion, no heels)
Replaces Aeolian / Chickering repetitions. No cushion, no heels. Set of 90.

Part Number: 06-5745

Aeolian / Chickering Repetition Set (no cushion, heels included)
Replaces Aeolian / Chickering repetitions. No cushion, heels included. Set of 90.

Part Number: 06-5744

Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Set of 90.

Part Number: 06-5291-10

Gram Gauge Jig
Use with gram gauge for accurate determination of gram tension in WNG flanges. Includes 10g gram guage.

Part Number: 06-5901

WNG Grand Shank/Butt assembly, W- knuckle, Set of 90
Grand Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size and knuckle position.

Part Number: 06-5298

WNG Shank/Butt assembly, W/O knuckle, Set of 90
Shank/Butt assembly (no Flange) without knuckles attached, Specify knuckle size.

Part Number: 06-5297

WNG Shank Flange
Shank flange, WNG

Part Number: 06-0099

Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features a medium knuckle, and a Mason & Hamlin flange. Set of 90. Kuckles not attached More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5108-11

Wessell, Nickel & Gross Classic Shank & Flange Set, (knuckles not attached)
For pre-Aeolian Mason & Hamlin and other pianos. Features a large knuckle and a WNG flange. Knuckles not attached. Set of 90.

Part Number: 06-5109-11

Kawai T1 Repetition Set (heels not attached)
Replaces Kawai T1 style repetitions. Heels are included, but not attached. Set of 90.

Part Number: 06-5747

Kawai T1 Repetition Set (heels attached)
Replaces Kawai T1 style repetitions. Heels are attached. Set of 90.

Part Number: 06-5746

Kawai T1 Shank & Flange Set, Flex 1
Features low leverage, a large knuckle and a Kawai T1 flange. Set of 90.

Part Number: 06-5289-10

Damper Action Installation Tool Kit
Understanding that most piano rebuilders have little-to-no experience installing damper actions, Wessell, Nickel & Gross has developed a comprehensive set of tools and procedures to help them install a WNG Damper Action into any piano. The Damper Installation Kit includes a Damper Action Measuring Tool, a Damper Flange Rail Punch, an Under Lever Center Height Gauge, and a Damper Pickup Half Stroke Gauge. The kit is meant to be used with WNG’s Damper Action Installation Procedure, which is divided into seven parts and can be found below.

Damper Action Measuring Tool

This invaluable tool quickly and easily performs the following operations:
  • 1. Tells you if a WNG damper action will fit inside your piano.
  • 2. Helps you pick the correct spoon length for your piano.
  • 3. Gives you the correct mounting block thickness for mounting to the belly rail.
  • Damper Flange Rail Punch

    The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.

    Under Lever Center Height Gauge

    This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.

    Damper Pickup Half Stroke Gauge

    The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.


Part Number: 06-5675

Regulating Tool Kit

Drop Screwdriver

Unlike most drop screwdrivers, WNG's are intentionally made to be very short. This allows the technician to easily steady his hand on the shank flanges while regulating. WNG also offers two different versions of its Drop Screwdriver--one with a barrel and one without. The barrel helps to locate the tool on the drop screw, however, some technicians prefer not to have this barrel.
backcheck

Balancier and Jack Regulating Tool

The handle and tool tip are the same on WNG's Jack and Balancier Regulating Tools--the only difference between the two are their lengths. The Jack Regulating Tool is the ideal length to reach in to the regulating screw on the jack. backcheck

Let-Off

The WNG Let-Off Tool allows you to adjust let-off button eye screws during a bench regulation. The tool's length is ideal for steadying your hand on the shank flanges and its tip is relieved so that it will not bind on the regulating screw. *Please note that the WNG Let-Off Tool is designed for setting let-off on actions that use an eye screw. It is not the appropriate tool for dowel regulating buttons.* backcheck

Damper Hook

Typically, piano technicians remove the damper to make the topbend--a process that is highly inefficient. When pianos are being manufactured, factory damper installer workers make this same bend while the damper is inside the piano, resulting is much less wasted time. WNG's Damper Hook enables piano technicians everywhere to use the factory's efficient method of making topbend while the damper is still inside the piano.
backcheck

Dimension Gauges

WNG provides both metric and English gauges with the most common regulating dimensions used in bench regulations. backcheck

Backcheck Bender

The WNG Backcheck Bender was designed to be a comfortable yet functional tool with a slot to grip backcheck wire firmly and a tip with the ideal angle for bending backcheck wires. backcheck *Please note that this item is back ordered, call (573) 754-6690 for estimated ship date*

Part Number: 06-5670

Precision Analog Tension Gram Dial Gauge (5g)
Use for accurate determination of resistance in shank and repetition flange centers and all pinned articulating parts to ensure they operate within defined tolerances.

Part Number: 06-0334

Custom Damper Action (Assembled)
Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:


Part Number: 06-5801

Custom Damper Action (Unassembled)
Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:


Part Number: 06-5802

WNG Modern Repetition Set (no cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5032

WNG Modern Repetition Set (no cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5031

WNG Modern Repetition Set (w/cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5030

WNG Modern Repetition Set (w/cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5029

WNG Classic T1 Repetition Set (heels not attached)
Replaces Wessell, Nickel & Gross T1 repetitions that use the Classic WNG Jack. Heels are included, but not attached. Set of 90.

Part Number: 06-5028

WNG Classic T2 Repetition Set (w/cushions, heels attached)
Replaces Wessell, Nickel & Gross T2 repetitions that use the Classic WNG jack. with cushions, 24 mm Heels are attached. Set of 90.

Part Number: 06-5756

Renner Type Long Flange Repetition Set (no cushion, heels not attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are included, but not attached. Set of 90.

Part Number: 06-5024

Renner Type Long Flange Repetition Set (no cushion, heels attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are attached. Set of 90.

Part Number: 06-5023

Renner Type Long Flange Repetition Set (w/cushion, heels not attached)
Replaces Renner Type repetitions that use an integrated rest cushion and a long flange. Heels are not attached. Set of 90.

Part Number: 06-5026

Renner Type Long Flange Repetition Set (w/cushion, heels attached)
Replaces Renner Type repetitions that use an integrated rest cushion and a long flange. Heels are attached. Set of 90.

Part Number: 06-5025

Precision Analog Tension Gram Dial Gauge (10g)
Use for accurate determination of resistance in shank and repetition flange centers and all pinned articulating parts to ensure they operate within defined tolerances.

Part Number: 06-0336

Young Chang Repetition Set (heels not attached)
Replaces Young Chang repetitions. Heels are included, but not attached. Set of 90.

Part Number: 06-5022