Search results for 'Balance rail pins'

Flange Screw - M4 x 15 mm - set of 90
Flange Screw - M4 x 15 mm - set of 90 for WNG aluminum action rails

Part Number: 06-0346

Front Rail Bushing (set of 90)
N/A

Part Number: 06-5313

Vertical Piano Action, Complete package
Standard Features Include Appropriate Rails Brackets as Specified in Scale Stick Hammers, Bored and Shanked Composite Hammer Butt & Shanks Composite Repetitions Sustain & Soft Pedal Angled Bass Damper Levers Straight Damper Levers Complete Installation Tools
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB

Part Number: 06-5804

Center Pins,Hrd Bush., 1.272Smm, Set/100
Stainless Steel,1.272mm, short

Part Number: 06-5163

Center Pins,Hrd Bush., 1.268Smm, Set/100
Stainless Steel,1.268mm short

Part Number: 06-5162

Center Pins,Hrd Bush., 1.268Lmm, Set/100
Stainless Steel,1.268mm long

Part Number: 06-5160

Tool set, Vertical Action Installation
Set of Vertical action installation tools.

Part Number: 06-5990

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2 (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Knuckles included but not attached. Set of 90.

Part Number: 06-5108-21

Mason & Hamlin Standard Shank for tubular rail, ea., Flex 2
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0570

Mason & Hamlin Shank & Flange Set for Tubular Rail, Flex 2
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-20

Mason & Hamlin Standard Shank for tubular rail, ea.,
Features low leverage, a large knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-0027

Damper Action Tapping Kit
Kit contains: Aluminium Tapping Fluid, 3.3mm Drill, and M4.7mm Thread Tap.

Part Number: 06-5919

Tapping Fluid, aluminum, 4 oz.
Tapping Fluid, aluminum, 4 oz.

Part Number: 06-0282

Tap (taper), M4 x 0.7, Damper Action rail
Tap (taper), M4 x 0.7, Damper Action rail

Part Number: 06-0559

3.3 Drill Bit, #30, Damper Action rail
3.3 Drill Bit, #30, Damper Action rail

Part Number: 06-5628

Assembled Vertical Piano Action
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5805

Let off Rail
Let off rail

Part Number: 06-0521

Center Pins,Hrd Bush., 1.272Lmm, Set/100
Stainless Steel,1.272mm long

Part Number: 06-5161

Mason & Hamlin Shank & Flange Set for Tubular Rail, (knuckles not attached)
For Mason & Hamlin Pianos with serial number 90,000 and above. Features a medium knuckle, and a Mason & Hamlin flange. Set of 90. Kuckles not attached More Information: WNG sells hammers!

Click here to visit our hammer page!

Need a drill bit?

Click here to visit our drill bit page!

Part Number: 06-5108-11

Unassembled Grand Piano Top Action
Two Ways To Order *Please note that custom parts are non-refundable.* To order an Unassembled Top Action you can either use the online ordering form below or use the PDF Unassembled Hammer Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Unassembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5803

Center Pins,Hrd Bush., 1.290Lmm, Set/100
Stainless Steel,1.290mm, long

Part Number: 06-5159

Center Pins,Hrd Bush., 1.290Smm, Set/100
Stainless Steel,1.290mm, short

Part Number: 06-5158

Center Pins,Hrd Bush., 1.285Lmm, Set/100
Stainless Steel,1.285mm, long

Part Number: 06-5157

Center Pins,Hrd Bush., 1.285Smm, Set/100
Stainless Steel,1.285mm, short

Part Number: 06-5156

Center Pins,Hrd Bush., 1.280Lmm, Set/100
Stainless Steel,1.280mm, long

Part Number: 06-5155

Center Pins,Hrd Bush., 1.280Smm, Set/100
Stainless Steel,1.280mm, short

Part Number: 06-5154

Center Pins,Hrd Bush., 1.275Lmm, Set/100
Stainless Steel,1.275mm, long

Part Number: 06-5153

Center Pins,Hrd Bush., 1.275Smm, Set/100
Stainless Steel,1.275mm, short

Part Number: 06-5152

Center Pins,Hrd Bush., 1.270Lmm, Set/100
Stainless Steel,1.270mm long

Part Number: 06-5151

Center Pins,Hrd Bush., 1.270Smm, Set/100
Stainless Steel,1.270mm short

Part Number: 06-5150

Front Rail Pin Set (American Std Long)
Set of 90 front rail pins. American Std Long, 3.71mm x 43mm.

Part Number: 06-5318

Assembled Grand Piano Top Action
Two Ways To Order *Please note that custom parts are non-refundable.* To order an Assembled Top Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.

Part Number: 06-5800

Damper Action Installation Tool Kit
Understanding that most piano rebuilders have little-to-no experience installing damper actions, Wessell, Nickel & Gross has developed a comprehensive set of tools and procedures to help them install a WNG Damper Action into any piano. The Damper Installation Kit includes a Damper Action Measuring Tool, a Damper Flange Rail Punch, an Under Lever Center Height Gauge, and a Damper Pickup Half Stroke Gauge. The kit is meant to be used with WNG’s Damper Action Installation Procedure, which is divided into seven parts and can be found below.

Damper Action Measuring Tool

This invaluable tool quickly and easily performs the following operations:
  • 1. Tells you if a WNG damper action will fit inside your piano.
  • 2. Helps you pick the correct spoon length for your piano.
  • 3. Gives you the correct mounting block thickness for mounting to the belly rail.
  • Damper Flange Rail Punch

    The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.

    Under Lever Center Height Gauge

    This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.

    Damper Pickup Half Stroke Gauge

    The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.


Part Number: 06-5675

Scale Stick Kit
This kit contains everything that a piano technician needs to create a scale stick using WNG's instructions. If you need help on how to create a Scale Stick, please download WNG's instructions below.





Please send all completed Scale Sticks to: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834

Part Number: 06-5806

Custom Damper Action (Assembled)
Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:


Part Number: 06-5801

Solid Bushing Repinning Kit
One center pin cache and one set of burnishers.

Part Number: 06-5666

Custom Damper Action (Unassembled)
Two Ways To Order *Please note that custom parts are non-refundable.* To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 N. Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help

The damper action installation is broken into several parts. You can read each of the segments below:


Part Number: 06-5802

WNG Modern Repetition Set (no cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5032

WNG Modern Repetition Set (no cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5031

WNG Modern Repetition Set (w/cushion, heels not attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are included, but not attached. Set of 90.

Part Number: 06-5030

WNG Modern Repetition Set (w/cushion, heels attached)
When mounted on WNG Rails, will replace a standard Renner action with no modification to the keyboard. Heels are attached. Set of 90.

Part Number: 06-5029

Renner Type Long Flange Repetition Set (no cushion, heels not attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are included, but not attached. Set of 90.

Part Number: 06-5024

Renner Type Long Flange Repetition Set (no cushion, heels attached)
Replaces Renner Type repetitions for use with a rest rail and a long flange. Heels are attached. Set of 90.

Part Number: 06-5023

Key Pin Tool Set
Key Pin Tool Set

Part Number: 06-5645

Front Rail Pin Set (European Std)
Set of 90 front rail pins. European Std, 3.26mm x 42mm.

Part Number: 06-5312

Balance Rail Pin Set (Old Steinway Long)
Set of 90 balance rail pins. Old Steinway Long, 4.11mm x 67mm.

Part Number: 06-5309

Balance Rail Pin Set (Old Steinway Short)
Set of 90 balance rail pins. Old Steinway Short, 4.11mm x 59mm.

Part Number: 06-5308

Balance Rail Pin Set (European Std Long)
Set of 90 balance rail pins. European Std Long, 3.5mm x 67mm.

Part Number: 06-5307

Balance Rail Pin Set (European Std Short)
Set of 90 balance rail pins. European Std Short, 3.5mm x 54mm.

Part Number: 06-5315

Balance Rail Pin Set (American Std Long)
Set of 90 balance rail pins. American Std Long, 3.71mm x 67mm.

Part Number: 06-5305

Renner Type Schwander Repetition Set (no cushion, heels not attached)
Replaces Renner Type Schwander repetitions for use with a rest rail and a short flange. Heels are included, but not attached. Set of 90.

Part Number: 06-5015

Renner Type Short Flange Repetition Set (no cushion, heels not attached)
Replaces Renner Type repetitions for use with a rest rail and a short flange. Heels are included, but not attached. Set of 90.

Part Number: 06-5013

Mason & Hamlin Repetition Set for Tubular Rail (heels not attached)
Replaces current Mason & Hamlin repetitions (serial number 90,000 and above). Heels are included, but not attached. Set of 90.

Part Number: 06-5011

Center Pins (#22-1/2)
"German Silver" 0.055" (1.40mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0249

Center Pins (#22)
"German Silver" 0.54" (1.37mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0248

Center Pins (#23-1/2)
"German Silver" 0.057" (1.45mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0251

Center Pins (#23)
"German Silver" 0.056" (1.42mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0250

Center Pins (#21-1/2)
"German Silver" 0.053" (1.35mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0247

Center Pins (#21)
"German Silver" 0.052" (1.32mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0246

Center Pins (#20-1/2)
"German Silver" 0.051" (1.30mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0245

Center Pins (#20)
"German Silver" 0.050" (1.27mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0244

Center Pins (#19-1/2)
"German Silver" 0.049" (1.24mm) center pins, sold by the ounce.

Part Number: 06-0243

Center Pins (#19)
"German Silver" 0.048" (1.22mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0242

Center Pins (#18-1/2)
"German Silver" 0.047" (1.19mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0241

Bridge Pin Set (#10)
Set of 100 3.1mm x 25mm polished stainless steel bridge pins.

Part Number: 06-0237

Bridge Pin Set (#9)
Set of 100 2.8mm x 25mm polished stainless steel bridge pins.

Part Number: 06-0236

Bridge Pin Set (#8)
Set of 100 2.5mm x 25mm polished stainless steel bridge pins.

Part Number: 06-0235

Bridge Pin Set (#7)
Set of 100 2.2mm x 25mm polished stainless steel bridge pins.

Part Number: 06-0234

Renner Type Short Flange Repetition Set (no cushion, heels attached)
Replaces Renner Type repetitions for use with a rest rail and a short flange. Heels are attached. Set of 90.

Part Number: 06-5004

Center Pins (#18)
"German Silver" 0.046" (1.17mm) center pins, sold by the ounce (28.35 g).

Part Number: 06-0240

WNG Sample Parts Kit
WNG offers a Sample Parts Kit to aid technicians in determining which parts will work best on a specific piano. The kit consists of several pre-assembled shanks and repetition assemblies that will fit most common piano brands and which can be installed on a trial basis. It also contains a variety of flanges, shanks, and knuckles so that a custom action can be built to match most pianos. With nine different repetition heel heights that can be placed in fourteen different positions, a technician has the ability to experiment with different combinations to improve the geometry of the piano action.

Part Number: 06-5231

Front Rail Pin Set (American Std Short)
Set of 90 front rail pins. American Std Short, 3.71mm x 37mm.

Part Number: 06-5310

Balance Rail Pin Set (American Std Short)
Set of 90 balance rail pins. American Std Short, 3.71mm x 54mm.

Part Number: 06-5314

Mason & Hamlin Shank & Flange Set for Tubular Rail,
For Mason & Hamlin Pianos with serial number 90,000 and above. Features low leverage, a medium knuckle, and a Mason & Hamlin flange. Set of 90.

Part Number: 06-5108-10

Renner Type Schwander Repetition Set (no rest cushion, heels attached)
Replaces Renner Type Schwander repetitions. For use with a rest rail and a short flange. Heels are attached. Set of 90.

Part Number: 06-5006

Mason & Hamlin Repetition Set for Tubular Rail (heels attached)
Replaces current Mason & Hamlin repetitions (serial number 90,000 and above). Heels are attached. Set of 90.

Part Number: 06-5002

Bridge Pin Set (#6)
Set of 100 2.0mm x 25mm polished stainless steel bridge pins.

Part Number: 06-0233