Action Parts
Drill Bit - Hammer Boring, Flex 2
One drill bit. 4.15 mm for flex 2 shank tubes.
Part Number: 06-5661
Drill Bit - Hammer Boring, Flex 3
One drill bit. 3.6 mm for flex 3 shank tubes.
Part Number: 06-5662
Tool set, Vertical Action Installation
Set of Vertical action installation tools.
Part Number: 06-5990
Vertical Piano Action, Complete package
Standard Features Include
Appropriate Rails
Brackets as Specified in Scale Stick
Hammers, Bored and Shanked
Composite Hammer Butt & Shanks
Composite Repetitions
Sustain & Soft Pedal
Angled Bass Damper Levers
Straight Damper Levers
Complete Installation Tools
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB
Two Ways To Order To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Upright Action Order Form. Once downloaded, you can either: A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at: Wessell, Nickel & Gross Suite #1 4111 North Freeway Blvd. Sacramento, CA 95834 Fax: (916) 567-1941 B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Online Order Form Information Type F Bracket Codes Type F Short Straight W/O Foot: F-SS-N Type F Interior Connector: F-IC Type C Bracket Codes Type C - Offset W Foot: C-O-F Type C - Straight W Foot: C-S-F Type C - Interior Connector: C-IC Type F & C Bracket Codes No Bracket: NB
Part Number: 06-5804
Action Support Assembly, Vertical, Small
Action Support assembly, Vertical, Small
Part Number: 06-5991
Aeolian / Chickering Repetition Set (no cushion, heels included)
Replaces Aeolian / Chickering repetitions. No cushion, heels included. Set of 90.
Part Number: 06-5744
Aeolian / Chickering Repetition Set (no cushion, no heels)
Replaces Aeolian / Chickering repetitions. No cushion, no heels. Set of 90.
Part Number: 06-5745
Aeolian Mason & Hamlin Shank & Flange Set,
Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.
Part Number: 06-5104-10
Aeolian Mason & Hamlin Shank & Flange Set, (knuckles not attached)
Features a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.
Knuckles not attached
More Information:
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-5104-11
Aeolian Mason & Hamlin Shank & Flange Set, Flex 2
Features low leverage, a large knuckle and an Aeolian Mason & Hamlin flange. Set of 90.
Part Number: 06-5104-20
Aeolian T1 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Knuckles included but not attached. Set of 90.
Part Number: 06-5104-21
Aeolian T2 Repetition Set (no cushion, heels attached)
Aeolian T2 Repetition, no cushion, heels attached.
Part Number: 06-5751
Aeolian T2 Repetition Set (no cushion, heels not attached)
Aeolian T2. no cushion, Heels not attached. Set of 90.
Part Number: 06-5752
Aeolian T2 Shank & Flange Set, Flex 1 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Set of 90.
Part Number: 06-5291-10
Aeolian T2 Shank & Flange Set, Flex 1 (knuckles not attached)
Features a large knuckle and an Aeolian T2 flange. Set of 90.
More Information:
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-5291-11
Aeolian T2 Shank & Flange Set, Flex 2 (knuckles attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Set of 90.
Part Number: 06-5291-20
Aeolian T2 Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle and an Aeolian T2 flange. Flex2. Knuckles included but not attached. Set of 90.
Part Number: 06-5291-21
Assembled Grand Piano Top Action
Two Ways To Order
*Please note that custom parts are non-refundable.*
To order an Assembled Top Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either:
A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at:
Wessell, Nickel & Gross
Suite #1
4111 North Freeway Blvd.
Sacramento, CA 95834
Fax: (916) 567-1941
B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Grand Piano Hammer (Top) Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5800
Assembled Vertical Piano Action
Two Ways To Order
To order an Assembled Vertical Action you can either use the online ordering form below or use the PDF Assembled Action Order Form. Once downloaded, you can either:
A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at:
Wessell, Nickel & Gross
Suite #1
4111 North Freeway Blvd.
Sacramento, CA 95834
Fax: (916) 567-1941
B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Upright Heel Heights Please download our Upright Heel Heights Guide for more information on choosing the right size for your piano.
Do You Need A Scale Stick? Please note that Wessell, Nickel & Gross drills and assembles the rails as part of this product. Please create a scale stick using WNG's instructions and send it to: Wessell, Nickel & Gross Suite #1 Attn: Mark Burgett 4111 N. Freeway Blvd. Sacramento, CA 95834 For more information on Scale Sticks and how to order a Scale Stick Kit, please visit our Scale Stick page. To download our Hammer Motion Calculator, click here. Please note that you will need the .net 4.0 framework installed on your computer.
Build Time Please note that the Assembled Vertical Piano Action is a custom-made product and will take approx 4-6 weeks to ship to the customer.
Part Number: 06-5805
Balance Rail Pin Set (American Std Long)
Set of 90 balance rail pins. American Std Long, 3.71mm x 67mm.
Part Number: 06-5305
Balance Rail Pin Set (American Std Short)
Set of 90 balance rail pins. American Std Short, 3.71mm x 54mm.
Part Number: 06-5314
Balance Rail Pin Set (European Std Long)
Set of 90 balance rail pins. European Std Long, 3.5mm x 67mm.
Part Number: 06-5307
Balance Rail Pin Set (European Std Short)
Set of 90 balance rail pins. European Std Short, 3.5mm x 54mm.
Part Number: 06-5315
Balance Rail Pin Set (Old Steinway Long)
Set of 90 balance rail pins. Old Steinway Long, 4.11mm x 67mm.
Part Number: 06-5309
Balance Rail Pin Set (Old Steinway Short)
Set of 90 balance rail pins. Old Steinway Short, 4.11mm x 59mm.
Part Number: 06-5308
Baldwin Clemson Repetition Set (heels attached)
Replaces Baldwin Clemson style repetitions. Heels are attached. Set of 90.
Part Number: 06-5007
Baldwin Clemson Repetition Set (heels not attached)
Replaces Baldwin Clemson style repetitions. Heels are included, but not attached. Set of 90.
Part Number: 06-5016
Baldwin Clemson Repetition Set T2 (heels attached)
Replaces Baldwin Clemson T2 style repetitions. Heels are attached. Set of 90.
Part Number: 06-5033
Baldwin Short Shank & Flange Set,
Features low leverage, a large knuckle, and a Baldwin flange. Set of 90.
Part Number: 06-5105-10
Baldwin Short Shank & Flange Set, (knuckles not attached)
Features a large knuckle, and a Baldwin flange. Set of 90.
Knuckles not attached
More Information:
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-5105-11
Baldwin Short Shank & Flange Set, Flex 2
Features low leverage, a large knuckle, and a Baldwin flange . Set of 90.
More Information:
WNG sells hammers!
Need a drill bit?
Part Number: 06-5105-20
Baldwin Short Shank & Flange Set, Flex 2 (knuckles not attached)
Features low leverage, a large knuckle, and a Baldwin flange. Flex2, Knuckles included but not attached. Set of 90.
Part Number: 06-5105-21
Baldwin T2 Short Shank & Flange Set, Flex 1
Features low leverage, a large knuckle, and a Baldwin T2 flange. Set of 90.
Part Number: 06-5430-10
Baldwin T2 Short Shank & Flange Set, Flex 1, Without knuckles attached
Features low leverage, a large knuckle, and a Baldwin T2 flange. Without knuckles attached. Set of 90.
Part Number: 06-5430-11
Capstan Set (Old Steinway)
Set of 90 lightweight, low-friction capstans for old Steinway shanks.
Part Number: 06-5355
Capstan Set (Standard)
Set of 90 lightweight, low-friction capstans for industry-standard shanks.
Part Number: 06-5303
Capstan V1 Aluminum, Hard anodized, Set of 90
Set of 90 lightweight, low-friction capstans
Part Number: 06-5330
Capstan, Dowel for Vertical Pianos, Set of 90
Dowel Capstan *- Composite head and steel wire (overall length 4").
Part Number: 06-0508
Center Pins (#18)
"German Silver" 0.046" (1.17mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0240
Center Pins (#18-1/2)
"German Silver" 0.047" (1.19mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0241
Center Pins (#19)
"German Silver" 0.048" (1.22mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0242
Center Pins (#19-1/2)
"German Silver" 0.049" (1.24mm) center pins, sold by the ounce.
Part Number: 06-0243
Center Pins (#20)
"German Silver" 0.050" (1.27mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0244
Center Pins (#20-1/2)
"German Silver" 0.051" (1.30mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0245
Center Pins (#21)
"German Silver" 0.052" (1.32mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0246
Center Pins (#21-1/2)
"German Silver" 0.053" (1.35mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0247
Center Pins (#22)
"German Silver" 0.54" (1.37mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0248
Center Pins (#22-1/2)
"German Silver" 0.055" (1.40mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0249
Center Pins (#23)
"German Silver" 0.056" (1.42mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0250
Center Pins (#23-1/2)
"German Silver" 0.057" (1.45mm) center pins, sold by the ounce (28.35 g).
Part Number: 06-0251
Custom Damper Action (Assembled)
Two Ways To Order
*Please note that custom parts are non-refundable.*
To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either:
A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at:
Wessell, Nickel & Gross
Suite #1
4111 N. Freeway Blvd.
Sacramento, CA 95834
Fax: (916) 567-1941
B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5801
Custom Damper Action (Unassembled)
Two Ways To Order
*Please note that custom parts are non-refundable.*
To order a Custom Damper Action you can either use the online ordering form below or use the PDF Damper Action Order Form. Once downloaded, you can either:
A) Print the form, fill out the required information by hand, and then either mail or fax it to Wessell, Nickel & Gross at:
Wessell, Nickel & Gross
Suite #1
4111 N. Freeway Blvd.
Sacramento, CA 95834
Fax: (916) 567-1941
B) Open the PDF in the latest version of Adobe Reader, type your information directly onto it, save your finished form, and email it back to us at sales@wessellnickelandgross.com. Adobe Reader is free and can be found at this address: http://get.adobe.com/reader/.
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
What Options Should I Choose? If you have any questions regarding what options to order with or how to order your damper action, please download the Custom Back Action Process instructions. You can specify a custom damper action by following these steps: 1) If you want WNG to supply damper heads and wires you will need to: - Establish the number of dampers in the piano. - Establish the number of bass dampers. 2) Determine which flange rail to use. 3) Determine which under lever combination of - Mounting flange (If using the Spring Flange how many notes with assist springs.) - Top flange height - Spoon Length - Leading pattern 4) Determine whether or not you wish WNG to supply a sostenuto rod installation kit. Please note that this costs an additional $75.00.
Can you drill and tap aluminium rails? Drilling and tapping aluminium isn't difficult, but it is different than wood. You'll need aluminium tapping fluid, a 3.3 drill bit, and a M4.7 thread tap before you can start drilling. Please note that WNG does not include these materials with its damper actions. However, you don't have access to or can't find them, WNG offers them in a kit or you can buy them individually via the links below.
- 1. Aluminum Tapping Fluid
- 2. 3.3 Drill Bit
- 3. M4.7mm Thread Tap
- 4. Damper hole tapping kit (includes all of the above)
Do You Need A Scale Stick? To complete your order of an Assembled Custom Damper Action, you will need to send WNG a completed Scale Stick. For information on how to order a Scale Stick Kit and instructions on how to use it, please visit our Scale Stick page.
Installation Help
The damper action installation is broken into several parts. You can read each of the segments below:
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
- Sostenuto Installation Procedure
- Repetition Helper Spring Installation
Part Number: 06-5802
Custom Repetition Set
Create your own custom repetitions by selecting the desired components. Set of 90.
Part Number: 06-5008
Custom Shank & Flange Set
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Set of 90.
Part Number: 06-5106-10
Custom Shank & Flange Set, (knuckles not attached)
Create your own custom shank & flange set by choosing the knuckle size (Y), and flange (Z). Set of 90.
More Information:
- Understanding Composite Shanks
- Download the How To Install Composite Shanks and Flanges PDF Manual.
- Download the How To Install Composite Shanks and Flanges Video.
Part Number: 06-5106-11
Custom Shank & Flange Set, Flex2
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Set of 90.
Part Number: 06-5106-20
Custom Shank & Flange Set, Flex2 (knuckles not attached)
Create your own custom shank & flange set by choosing the leverage (X), knuckle size (Y), and flange (Z). Flex2, Knuckles not attached. Set of 90.
Part Number: 06-5106-21
Damper Action Installation Tool Kit
Understanding that most piano rebuilders have little-to-no experience installing damper actions, Wessell, Nickel & Gross has developed a comprehensive set of tools and procedures to help them install a WNG Damper Action into any piano.
The Damper Installation Kit includes a Damper Action Measuring Tool, a Damper Flange Rail Punch, an Under Lever Center Height Gauge, and a Damper Pickup Half Stroke Gauge.
The kit is meant to be used with WNG’s Damper Action Installation Procedure, which is divided into seven parts and can be found below.
- 1. Selecting the correct WNG damper action
- 2. Create a damper action scale stick from the back of the keys
- 3. Drill the WNG damper flange rail
- 4. Drill the WNG damper sustain tray
- 5. Assemble the damper action
- 6. Install the damper action
- 7. Determine underlever center height using half stroke principles
Damper Action Measuring Tool
This invaluable tool quickly and easily performs the following operations:- 1. Tells you if a WNG damper action will fit inside your piano.
- 2. Helps you pick the correct spoon length for your piano.
- 3. Gives you the correct mounting block thickness for mounting to the belly rail.
Damper Flange Rail Punch
The WNG Damper Flange Rail Punch is perfect for marking a flange rail for drilling.Under Lever Center Height Gauge
This tool allows the technician to effortlessly arrive at the proper underlever center height for the damper action.
Damper Pickup Half Stroke Gauge
The Half Stroke Gauge makes it easy to create a half stroke relationship between the height of the underlever center pin and the spoon pickup to the key.
Part Number: 06-5675
